Section 4: Direction Indicator Boards For Free Zone Companies

Setting Up @ PKFZ > Rules & Regulations

Section 4: Direction Indicator Boards For Free Zone Companies

PKFZ Rules & Regulation
Section 4: 
Direction Indicator Boards For Free Zone Companies

4.7.0
Direction Indicator Boards For Free Zone Companies
4.7.1

The Free Zone Management will assist with the erection of indicator boards to provide information on location of companies in the Free Zone. These will be located at strategic points around the Free Zone, namely at roundabouts, junctions and outside all the Leased Office buildings.

4.7.2
The dimensions of indicator boards must be to an agreed standard to allow suitable fixing to the mounting posts which are 2 metres high, spaced at 800 mm apart and are 86 mm in diameter.
4.7.3

The dimensions of an indicator board shall be 1500 mm long and 250 mm deep and the lettering definition is to be: Transport Medium “x”, height 50 mm.

4.7.4

Companies wishing to install an indicator board should approach the Engineering Department of PKFZ to ensure a suitable standard. The indicator board with fixtures must then be delivered to the PKFZ Workshop (Tel: 03-31011568) together with a sketch indicating the desired location(s). The PKFZ Workshop will then fix the sign with a minimum cost of RM 50.00. Clients are advised to have their individual designs approved through the Engineering Department, prior to proceeding with manufacture and installation.

4.7.5

Companies may provide indicator boards for approval and erection at any time according to their individual needs at the Engineering Department of PKFZ.

4.7.6

Companies may provide indicator boards for approval and erection at any time according to their individual needs at the Engineering Department of PKFZ.